Milesight network camera Manuel d'utilisateur télécharger pdf (Page 14)

User Manual

Figure 3.12

Item

Description

Stop/Rescan

When searching the cameras, you can stop it and rescan by clicking again.

Select All

All the cameras will be selected at a time.

Clear All

All the cameras will be unchecked at a time.

Set Password

Enter the password at a time.

Click [OK] button to confirm the settings.

Cancel

Exit quit.

Note: Before you register the Milesight VMS Pro, you can only add up to 8 cameras. For more information, please

refer to Chapter VII Milesight VMS Server.

2. Add Camera

When the button is clicked, the window will show as below. You can add the camera manually.

1) Through IP address you can add Milesight's cameras and other cameras supporting ONVIF.

2) Through RTSP stream you can add cameras supporting RTSP.

Note: Those with * options are required. Including Name, IP, Port, User Name, Password.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Pas de commentaire

Milesight network camera Manuel d'utilisateur Page 14